12
How desperate Furniture – Step by Step Guide
Posted under Furniture ArticlesTo have a unique look that many homeowners in trouble mixing mobile with the latest modern styles.
Before you go throwing away your old dining room or bedroom set, to reconsider the revision. Distressed furniture can be very expensive to buy, so why not do it with a little 'fantasy and some TLC. This step by step guide to give you some tips that professionals, if embarrassed for mobile use.
1. Sand: Sand the Finish the piece, so that the primer / paint has something to follow. Use sandpaper to medium for this purpose.
2. Rough built area: Take some tools (hammer, screwdriver, chain, etc.) and the rough surface of the workpiece. This will make it up to your discretion unfortunate that furniture. The more the rough surface of the older, the piece is displayed.
3.Prime: Use a good primer and white to the game> Furniture, a thin layer. After the piece is dry, follow up with a light sanding.
4. Top Coat: Choose a finish that complements the room. If you want to remain neutral, then with the white / off white. Apply two coats of top coat well. Sometimes homeowners will ask a crackle finish in the top layer seems as if the paint is dry and starts off with the chip. Finally a crackle read the following steps:
a. Follow steps 1-3.
b. OptionalPrimer: Be creative! If you do not want to show the piece, from Crackle primer, then now is the time to be creative. You can be a different base coat to show behind the upper mantle, where appropriate, the crackle effect.
c. Apply crackle glaze, crackle when you want the outer coat. Allow it to dry according to package instructions. Is usually a clear glaze at your local center sells the house.
d. Top Coat: Apply top coat evenly (do not try to over brush, which canBecause of the color to pull). The outer coat should be of a different color, then primer / basecoat to withdraw the crackling.
e. Continue to follow the procedure.
5. Optional Glaze Coat: After the piece has dried, apply a whole piece of enamel. This step is optional, but recommended. This glaze (usually dark brown / gray), when applied, raises all the areas of maximum (phase 2), and highlights the details of the piece. The best way to applyThe glaze with a brush and remove excess with a rag. Clean with a uniform pressure () in one direction.
6. Apply a layer of sealing: Water-based poly works well for them. Apply 2-3 thin layers of product recommended by the manufacturer and do not forget the sand in his hands. This step protects all your hard work.
Now step back and enjoy your new furniture. You'll be amazed at the results more quickly and simplyhave changed the look of your room. Take your time and especially in this creative!
Add A Comment